If you’re planning to renovate your kitchen, you’ll faced a dilemma. You love the stunning granite counter-top , but the cabinet underneath seems to be old or worn-out for the moment.
There are a number of people are seeking to upgrade their kitchen cabinets however, not the countertop especially on a tight budget. What if you could change the cabinets in the kitchen without having to change countertops? What advice would expert plumbers have to offer?
There is a benefit to be thankful for. You can update your kitchen cabinets without removing the countertop. You should purchase modern cabinets at hardware stores and remove the cabinet that was previously installed beneath the countertop, taking care. Following that, you’ll be able to put in the cabinet that was older. In addition, you can utilize studs to help hold the countertop while you sit.
Can You Replace Kitchen Cabinets Without Replacing Countertop?
There is a way to replace the cabinets in your kitchen without harming the countertop. Furthermore, the process is less complicated than most people think. In addition, doing this DIY home repair of kitchen cabinets will keep you from having to pay for professionals like plumbers and woodworkers.
Make sure you provide adequate support for the countertop constructed from stone or wood prior to the time you remove the cabinet’s base cabinets and frame. Because the countertop is a substantial structure, you should provide it with enough support so it can stand in the way of replacement.
It is suggested to install studs on the countertop so that it doesn’t fall off the top, damaging the entire cabinet. We’ll be using studs of 2X4 in this instance.
How to Remove Kitchen Cabinets Without Removing Countertop?
It is crucial to comprehend the. You could swap the cabinet in your kitchen that was outdated to newer ones without cutting the countertop. The question is , what can you do to take down the cabinets without damaging countertops inside your home?
Many plumbers will suggest many things, the most efficient way to tackle changing the cabinet. You don’t need to fret regarding the technical aspect of the cabinet.
Step 1: Loosening the Cabinet Installation Screws
If you examine your kitchen cabinet, you’ll find various screws that connect to the cabinet and to the walls behind it. The screws hold the kitchen cabinet against walls. The screws need to be removed one at a time to prepare the cabinet for removal.
It is important to think of two requirements for doing this. It is essential to think about two conditions
- How do you know if the cabinet was constructed in the past before installing flooring? It is possible that you cannot remove the cabinet completely in this case because it is connected to the flooring in your kitchen.
- Also, consider the design of your toe’s base and how it is the construction. In some instances, the toe base might not be an additional piece of work. It’s made of cabinets directly. If that’s the case, it’s difficult to remove the cabinet without damaging it. It is essential to take out the cabinet’s boxes in order to put them back into place with new ones.
Step 2: Cutting the Plumbing Area Sides
Most of the time , the rear of the cabinet is attached by plumbing. This could mean that you struggle to get the cabinet off of its countertop beneath. It is crucial to make sure that you do not damage the plumbing installation during the process.
You can use the salzsaw or sabersaw for the job. Use the saw that you feel at ease with to get the greatest outcomes. Once you’ve found the best saw for you use it to cut down the plumbing of the kitchen. It is near the cabinet.
When you cut around the plumbing space, ensure you cut wide enough. They should be sized so that it can slide over the kitchen sink. Don’t rush to cut corners, or you’ll end up damaging pipes.
Cutting techniques that are alternative:
Many have had difficulty using the sabersaw or the salzsaw challenging. It is therefore recommended to use a different, but efficient cutting technique. It is a great way to cut the back of your kitchen cabinets, separating them from plumbing areas which surround it.
It is suggested to tap the cabinet’s walls using the maximum force to lift them from the location where you place them. Once you’ve knocked them out, the cabinet’s rear, try to take these walls out by one at a time. Be careful not to harm your plumbing system.
Step 3: Using the Studs for Countertop Support
As we’ve said before, kitchen countertops , including stone and granite countertops are extremely heavy. They are therefore not supported by adequate support and may fall off the top, causing damage to the entire cabinet installation.
We’re making use of 2”X4 4” Studs to achieve this. In addition, the studs should have enough strength to hold the heavy countertop. If you’re taking off one side of the cabinet, place the stud in the top to ensure that the countertop is properly supported. Make use of the same stud-mounting technique for the remaining sides to make sure the countertop is maintained in good shape.
Step 4: Inspecting the Cabinet Walls
Because the cabinet’s wall is close to pipes, the wall surfaces are moist. This causes the growth of mold and mildew. It can be hazardous to your kitchen cabinets and its walls. Furthermore the development of mold isn’t healthy for you.
Also, be aware of the cabinets’ walls and pipes. If you see any signs of mold growth, you can use commercial mold killers to remove the mildews as well as mold. Also, it is recommended to employ dampening removal products on the walls to ensure they remain dry. This will stop the walls from getting damp in the near future.
If you suspect that the mold has grown to a large extent and the walls have become damaged, you should seek assistance from a qualified contractor. Also, examine the plumbing to see if there is any leaks. If you’ve discovered leaks, you can apply Teflon tape to seal them properly.
Step 5: Install the New Cabinet
If you are sure that the walls aren’t scratched anymore it is now time to install your cabinet. It is necessary to push the walls of the cabinet into the sides were cut near the plumbing points. Once the cabinet is installed in a secure manner then you can remove the studs supporting the countertop.
Then, you’ll be able to tighten each one at a time, and then look for a gap within the plumbing. It’s important to fill it with the right substance such as concrete , or Teflon to ensure long-lasting durability.
Can You Replace Countertops Without Damaging Cabinets?
Most kitchen remodeling projects involve cabinet removal, but there are those who are seeking to upgrade their countertops, too. The best part is that it is feasible to replace countertops made of granite or stone easily , without damaging cabinets.
If the countertop has been damaged or stained, or is beginning to wear away, you should consider changing it out with new one. However, you should be extra cautious when removing any granite countertops since it is extremely heavy and durable. We recommend calling a professional to help you complete the task. It may cost a lot but you’ll prevent destroying your cabinet or injuring yourself.
Conclusion
What if you were able to install kitchen cabinets without having to change countertops? It’s generally simple and easy to remove the kitchen cabinet and replace it with countertops that have studs supporting the cabinets. One of the most crucial things is to stay in a positive state of mind and follow a step-by step way with care and care. If you adhere to our guidelines on the removal of kitchen cabinets You’ll realize it’s much easier than you anticipated it.
